40B 96 FORCE

Force, pressure and displacement transducers indicator with Input for strain-gauge or potentiometer - alarm units

Microprocessor based indicator in both 96x48 (1/8 DIN) formats manufactured with SMT. The instruments have a lexan membrane faceplate (guaranteed to IP65) which has 3 keys, a 5 digit display and 4 indicating LED's for the output statuses. The input signal can be selected from a wide range of sensors:
Potentiometer (minimum 100Ω) Load cell with sensitivity autoranging between 1,5 and 3,3mV/V. Strain-gauge pressure sensor Magnetostrictive position sensors The selection is made using the faceplate keys. A digital input (24Vdc/5mA) is available for resetting, hold, flash, peak handling or releasing latch. The instruments have a maximum of 4 outputs that can be mechanical relays or logic outputs. One output of 0/4 to 20mA (max. 500Ω) is available for retransmitting the measured input signal. The retransmission output, the digital input and the third output are options available contemporaneously. Finally, a triac can be fitted to drive resistive loads up to a maximum of 1A at 240V.

The configuration can be simplified even further using the PC programming kit made up of a connection cable and a menu guide program that runs under Windows (data sheet cod.WINSTRUM). A configurable personal software protection code (password protection) can be used to restrict the levels of editing and displaying the configuration parameters.